洗碗机下喷臂总成5304518927适配Frigidaire Kenmore替换154567701 AP6810011 FBD2400KW系列喷水臂配件
Brief Description
Quantity
产品简介
这款下喷臂总成是洗碗机洗涤系统的核心部件,安装于洗碗机腔体底部,洗涤时高速旋转并向餐具喷出高压水流。喷臂长期经受高温、洗涤剂与食物残渣冲击,喷孔堵塞、臂体开裂或卡扣磨损后会出现洗不净、异响甚至漏水。本件为售后替换件,孔位与卡扣按原厂规格开模,对准卡口按压即可装回,无需工具。
适配症状自检
- 餐具洗完仍有残渣、油膜——喷臂喷孔被食物残渣或水垢堵塞
- 洗涤时有规律性的敲击声——喷臂变形或轴承磨损,旋转时刮碰餐具篮
- 喷臂不转或转速明显变慢——中心卡扣滑丝或进水通道堵塞
- 机器底部漏水——臂体开裂,高压水从裂缝喷出
技术参数
| 替代件号 | 5304518927 / 154567701 / 154567702 / 7294-13 / AP6810011 |
| 适配品牌 | Frigidaire(北极牌)/ Kenmore(凯文梅达)等美系洗碗机 |
| 适配机型 | FBD2400KW8B / FBD2400KW9B / FDB101SAW0~2 等系列(下单前请核对机型铭牌) |
| 安装位置 | 洗涤腔底部(下喷臂总成) |
| 材质 | 工程塑料,耐温耐洗涤剂 |
| 安装方式 | 对准中心卡口按压到位,徒手可拆装 |
| 包装 | 独立纸盒,气泡柱防压 |
安装与更换
断电断水后操作。本件为徒手可换的卡扣式部件:先取出旧件(喷臂握住中心向上拔起;滤网旋开锁扣取出),清理安装位的残渣与水垢,再将新件对准卡口按压或旋入到位,装回后试运行一个快洗程序确认无异响与漏水。安装全程无需专用工具,普通用户十五分钟内可完成。




常见问题 FAQ
How do I confirm this spray arm fits my dishwasher?
Check the part number printed on your original arm or the appliance model plate. This arm replaces part numbers 5304518927, 154567701, 154567702 and AP6810011. If your model starts with FBD2400KW or FDB101SA, it is very likely compatible.
My dishes are still dirty after washing. Is the spray arm always the cause?
Not always. First remove the arm and rinse it under running water to clear the spray holes. If the holes are clear but the arm will not spin, the center hub is worn. Cracks or wobbling also mean the arm should be replaced.
Do I need tools to replace it?
No. Grasp the arm at its center, pull it up to unsnap it from the mounting hub, then press the new one in until it clicks. The whole job takes less than five minutes.