Dishwasher Lower Spray Arm Assembly 5304518927 Compatible with Frigidaire Kenmore Replacement for 154567701 AP6810011 FBD2400KW Series Spray Arm Part
Brief Description
Quantity
Product Overview
This lower spray arm assembly is a core component of your dishwasher's wash system. Mounted at the bottom of the tub, it spins at high speed during the cycle and sprays pressurized water onto your dishes. Constant exposure to heat, detergent and food debris takes its toll — clogged jets, a cracked arm or a worn hub clip can lead to poor cleaning, strange noises or even leaks. This is a direct-fit aftermarket replacement: the jet layout and clip are molded to original factory specs, so it simply presses into place — no tools required.
Common Symptoms — Check Yours
- Dishes still have residue or a greasy film after the cycle — spray jets clogged with food particles or limescale
- Rhythmic knocking during the wash — warped arm or worn bearing causing it to scrape the dish rack as it rotates
- Arm won't spin or spins noticeably slower — stripped center clip or blocked water inlet
- Water leaking from the bottom of the machine — cracked arm body spraying water through the split
Specifications
| Replacement Part Numbers | 5304518927 / 154567701 / 154567702 / 7294-13 / AP6810011 |
| Compatible Brands | Frigidaire / Kenmore and other US-brand dishwashers |
| Compatible Models | FBD2400KW8B / FBD2400KW9B / FDB101SAW0~2 and other series (please verify your model plate before ordering) |
| Install Location | Bottom of the wash tub (lower spray arm assembly) |
| Material | Engineering plastic, heat- and detergent-resistant |
| Installation | Align with the center mount and press into place; installs and removes by hand |
| Packaging | Individual carton box with bubble wrap for crush protection |
Installation & Replacement
Disconnect power and water before you start. This is a tool-free, clip-on part: remove the old arm (grip it at the center and pull straight up; for the filter, twist the lock and lift it out), clean any debris and limescale from the mounting point, then align the new part with the mount and press or twist it into place. Run a quick cycle afterward to confirm there are no unusual noises or leaks. No special tools needed — most users finish in under fifteen minutes.




FAQ
How do I confirm this spray arm fits my dishwasher?
Check the part number printed on your original arm or the appliance model plate. This arm replaces part numbers 5304518927, 154567701, 154567702 and AP6810011. If your model starts with FBD2400KW or FDB101SA, it is very likely compatible.
My dishes are still dirty after washing. Is the spray arm always the cause?
Not always. First remove the arm and rinse it under running water to clear the spray holes. If the holes are clear but the arm will not spin, the center hub is worn. Cracks or wobbling also mean the arm should be replaced.
Do I need tools to replace it?
No. Grasp the arm at its center, pull it up to unsnap it from the mounting hub, then press the new one in until it clicks. The whole job takes less than five minutes.