Samsung Washing Machine Water Level Sensor DC96-01703B DPS-KS1B Pressure Switch Replacement Part for Samsung Front-Load Washers — Fixes Water Fill Issues and 4E Errors
Brief Description
Water level pressure switch compatible with Samsung washing machines, corresponding to DC96-01703B (also compatible with DPS-KS1B / DN-S14-H; cross-reference AP4458924 / PS4217080). Fixes water fill problems, false water level readings and 4E-type errors.
Quantity
Product Overview
This is a replacement water level pressure switch (water level sensor) for Samsung washing machines. It corresponds to OEM part number DC96-01703B and is compatible with DPS-KS1B, DN-S14-H and similar designations; cross-reference numbers AP4458924 / PS4217080. The pressure-type design features an air chamber and sensing air tube, and the plug-in terminal connects directly to the original position. A distorted water level signal can cause water fill problems, false water level readings and program malfunctions.
Compatible Symptoms (How to Tell If the Water Level Switch Is Faulty)
① Water intake fluctuates or the machine does not fill at all; ② The cycle stops midway with a 4E / 1E-type water level code; ③ The machine reports low water when the tub clearly has water, or reports full when empty and spins immediately; ④ The machine starts high-speed spinning before the water has fully drained. When troubleshooting, first check whether the air tube is leaking or disconnected, then replace the switch.
Specifications
| Item | Specification |
|---|---|
| Corresponding Part Number | DC96-01703B / DPS-KS1B / DN-S14-H |
| Cross-Reference Numbers | AP4458924 / PS4217080 |
| Compatible Brand | Samsung (front-load models using the above part numbers) |
| Type | Pressure-type water level switch (with air chamber + air tube) |
| Weight | Approx. 80g |
Installation and Replacement Instructions
After disconnecting power, open the top cover and locate the white/black round water level switch on the upper part of the machine body. Unplug the terminal and air tube, press the clip to remove the old part, snap the new part into place, then reconnect the air tube (push it all the way in to prevent air leaks) and the terminal. The whole process takes about 10 minutes.
FAQ
Q: Is DC96-01703B an LG part?
A: No. The DC96 prefix follows Samsung's numbering system; some sellers mistakenly list it as an LG part in their titles. This part is a Samsung washing machine water level switch — the corresponding LG part is in the 6501EA series.
Q: How do I tell a water level switch fault from a water inlet valve fault?
A: If no water enters and there is no sound of water filling, it is usually the water inlet solenoid valve or the faucet. If water enters but the water level is misjudged (overfills/underfills/false readings), it is usually the water level switch or the air tube.
Q: Is this an OEM part?
A: This is an aftermarket compatible replacement part, not manufactured by Samsung. The part number is for compatibility reference only.

