Samsung Washing Machine Electronic Door Lock DC34-000026A with Delay, Replacement Part for WW90H7410E and Other Models – Fixes Door Not Locking and DC Errors
Brief Description
Electronic door lock (with delay function) for Samsung front-load washing machines, equivalent to DC34-000026A. Fits WW90H7410E and other models. Solves door not locking, DC/DE error codes, and door stuck locked.
Quantity
Product Overview
This is a replacement electronic door lock (with delayed locking function) for Samsung front-load washing machines. It corresponds to OEM part number DC34-000026A and fits WW90H7410E and other models that use this part number. The electronic door lock consists of the lock body and a delay module: after the cycle ends, power is maintained for a few extra seconds to ensure the door unlocks safely. When the delay module or the lock body contacts fail, symptoms include the door not locking, the door popping open right after locking, and DC/DE error codes.
Compatible Symptoms (How to Tell If the Electronic Door Lock Is Faulty)
① Close the door and press Start — no locking action and the cycle won't run; ② The door automatically pops open a few seconds after locking; ③ The display shows DC / DE door fault codes; ④ The door stays locked after the wash cycle finishes. First rule out a bent door hook and foreign objects in the door seal; if the problem persists, replace the lock.
Technical Specifications
| Item | Specification |
|---|---|
| Corresponding Part Number | DC34-000026A |
| Compatible Models | Samsung WW90H7410E and other front-load models using the above part number |
| Type | Electronic door lock (with delayed unlock module) |
| Connector | Plug-in terminal, original mounting holes |
| Dimensions/Weight | Approx. 7×7×3cm, 73g |
Installation & Replacement Guide
Unplug the power, open the machine door, pry off the wire retaining ring on the door seal, peel back the rubber lip to expose the door lock; remove the mounting screws, unplug the connector, install the new lock, and reassemble. Takes about 15–20 minutes.
FAQ
Q: How do I know which door lock my machine uses?
A: The most reliable way is to remove the old lock and check the part number printed on the housing; DC34-000026A and DC34-00028A are two different generations with different structures and are not interchangeable.
Q: Why is my door lock a "delay type"?
A: On Samsung models with heated wash, the delay module inside the lock keeps power on for a few extra seconds after the cycle ends to confirm it is safe before unlocking. When replacing the lock, you must choose a model that also has the delay function; a standard type will trigger a door fault.
Q: Is this an OEM part?
A: This is an aftermarket compatible replacement part, not manufactured by Samsung; the part number is for compatibility reference only.


