Samsung Washer Drain Pump DC31-00178A DC31-00054D 120V Drain Motor Assembly Replacement for Samsung Front Load Washers – Fixes No-Drain and 5E Error
Brief Description
Drain pump assembly for Samsung washers, replaces DC31-00178A (compatible with DC31-00054D / DC31-00187A), 120V, pump housing included — fixes no-drain issues, 5E errors and pump leaks.
Quantity
Product Overview
This is an aftermarket replacement drain pump assembly for Samsung washers, replacing OEM part numbers DC31-00178A (compatible with DC31-00054D and DC31-00187A). 120V, complete with pump housing assembly. The drain pump removes dirty wash water from the machine. When the impeller jams on debris or the motor coil burns out, the washer stops draining and throws a 5E/SE error — replacing this pump solves the problem.
Signs You Need a New Drain Pump
① The cycle stalls for a long time at the drain stage and water won't empty; ② The display shows a 5E / SE drain fault code; ③ The motor hums during the drain stage but no water comes out; ④ Water seeps or leaks from the pump housing seams. First clear any debris from the pump chamber (hairpins, buttons and lint are common culprits) — if the pump still won't turn when powered, it's failed.
Specifications
| Item | Specification |
|---|---|
| Replaces Part Numbers | DC31-00178A / DC31-00054D / DC31-00187A |
| Compatible Brand | Samsung (front load models using the part numbers above) |
| Voltage | 120V |
| Construction | Includes pump housing assembly; original mounting holes and hose port locations |
| Weight | Approx. 520g (including packaging) |
Installation & Replacement Guide
Disconnect power and water, then remove the access panel at the bottom of the machine. Place a towel underneath to catch residual water, loosen the two hose clamps on the pump, and unplug the connector. Twist counterclockwise or remove the screws to take out the old pump, then reinstall in reverse order with the new pump. The whole job takes about 20–30 minutes.
FAQ
Q: Why does the drain pump hum but not drain?
A: The most common cause is debris jamming the impeller (the motor turns but the impeller is stuck); the next most common is a cracked or stripped impeller. If it still hums without draining after you open the pump chamber and clear the debris, the motor or impeller is damaged — replace the pump.
Q: Does a 5E error always mean the pump is bad?
A: Not necessarily. First check whether the drain hose is kinked, whether the drain height exceeds 1 meter, and whether the filter is clogged. Only replace the pump if the 5E error persists after ruling out hose and filter issues.
Q: Is this an OEM part?
A: This is an aftermarket compatible replacement part, not manufactured by Samsung. The part numbers are for compatibility reference only; mounting holes and connections match the original.


