Free shipping over $99 | Worldwide Delivery
Bitfala
Decoder amplifier board overall dimensions 75×50mm mounting holes 62×37mm

Lossless Bluetooth 5.0 Decoder Amplifier Board 240W Color Screen Display with Recording & Calling DC12V Bluetooth FM Radio TF Card USB AUX Input DIY Audio Speaker Modification Upgrade Mainboard

Unit price:
In Stock - 1000 Units

Brief Description

Bluetooth 5.0 decoder amplifier 2-in-1 board, LED color screen display, with recording and Bluetooth calling, supports Bluetooth/FM/TF card/USB/AUX five input sources, DC12V power supply, DIY audio speaker modification.

Quantity

Fast Shipping
Secure Payment
30 Days Return

Product Introduction

This is a Bluetooth 5.0 decoder and amplifier 2-in-1 audio modification mainboard, featuring an LED color screen display and a full-function remote control. It supports five audio input sources: Bluetooth, FM radio, TF card, USB drive, and AUX, and comes with recording and Bluetooth calling functions. Connect speakers and a DC12V power supply to build a complete desktop audio system or upgrade an old speaker.

Technical Specifications

ItemSpecification
Bluetooth Version5.0 (Dual Decoding)
Power Supply VoltageDC 7-22V (12V recommended)
Output Power2×40W (nominal), title power is peak rating
Audio Input SourcesBluetooth / FM / TF Card / USB Drive / AUX
Additional FunctionsRecording, Bluetooth calling, remote control, lyrics/track color screen display
Supported FormatsMP3 / WAV / APE / FLAC lossless
Receiving FrequencyFM 87.5-108MHz
Signal-to-Noise Ratio≥70dB
Overall Dimensions75×50mm, mounting holes 62×37mm

Interfaces and Wiring Instructions

The board features a TF card slot, USB input, AUX audio input, and speaker output terminals. The solder points on the back are labeled with audio input/output and power polarity. Two sets of PH plug wires are included, so no soldering is required to connect speakers and power. The remote control uses a button cell battery; see the included diagram for details.

FAQ

Q: What should I do if there is no sound after plugging in the power?
A: First confirm that the speaker wires are connected to the speaker output terminals and the impedance matches. Then use the remote control or the MODE button on the panel to switch to the correct audio source (Bluetooth/USB/TF/AUX). The color screen will not output sound if the wrong source is selected.

Q: What music formats are supported?
A: It supports common lossy and lossless formats including MP3, WAV, APE, and FLAC. USB drives and TF cards are plug-and-play, with playback resume after power off.

Q: How do I use recording and calling?
A: After connecting to a phone via Bluetooth, you can make calls directly. To record, long-press the REC button on the panel to start recording, and long-press again to save. Recording files are saved to the USB drive or TF card.

Decoder amplifier board overall dimensions 75×50mm mounting holes 62×37mm

Panel interfaces labeled TF card slot AUX audio input LED color screen USB input

Back of board audio input/output wiring solder point labels

MUSIC SPEAKERS color screen panel and remote control set

Remote control button function usage instructions table