Free shipping over $99 | Worldwide Delivery
Bitfala
2W Ice Maker Dedicated Water Pump NEWDUN YSP2P-JDVF2 Upper Pump Circulation Pump AC220V Compatible with Naixue, Xuelu, Xingji, Langtuo, Stute Flow-Type Ice Maker Parts

2W Ice Maker Dedicated Water Pump NEWDUN YSP2P-JDVF2 Upper Pump Circulation Pump AC220V Compatible with Naixue, Xuelu, Xingji, Langtuo, Stute Flow-Type Ice Maker Parts

Unit price:
In Stock - 1000 Units

Brief Description

NEWDUN MOTORS 2W Ice Maker Dedicated Upper Pump YSP2P-JDVF2, AC220V 2400RPM, for Flow-Type Ice Maker Spray Circulation, Interchangeable as Long as Shape and Parameters Match.

Quantity

Fast Shipping
Secure Payment
30 Days Return

Product Introduction

This is the upper pump (spray circulation pump) for flow-type commercial ice makers, original model NEW DUN MOTORS YSP2P-JDVF2, powered by AC220V, 2W low power consumption, 2400 RPM. During ice making, it pumps water from the tank to the top spray plate to evenly pour over the evaporator. When the pump fails, it directly shows as "no water pumping, no ice forming."

Technical Specifications

ItemSpecification
ModelYSP2P-JDVF2
BrandNEWDUN MOTORS
Power2W
Voltage/FrequencyAC 220V / 50Hz
Current0.12A
Speed2400 r/min
Motor Height17cm
Total Height19.2cm
Diameter5.6cm
Outlet (Lower)18mm Barb Fitting
Outlet (Upper)14mm Barb Fitting
Mounting Hole Spacing31mm

Compatible Models

Direct replacement as long as shape and parameters match. Common compatible brands: Naixue, Xuelu, Naikeweide, Xingji, Langtuo, Stute and other flow-type commercial ice makers. Before ordering, please check dimensions: total height 19.2cm, diameter 5.6cm, mounting hole spacing 31mm, outlets 18/14mm.

Installation and Replacement Tips

After disconnecting power, remove the old pump, keep the original bracket and water pipes, and connect the three-core power cable in the original direction (blue/red/green; wrong connection won't rotate but won't cause damage, just swap them). After reinstalling, power on and run dry for a few seconds to confirm the water flow direction, then resume ice making. It is recommended to also clean the water tank and spray plate scale to avoid secondary clogging of the new pump.

FAQ

Q: If the pump won't turn, can I just replace the pump?
A: Yes. As long as the dimensions and electrical parameters (220V/2W/2400 RPM) match, it can be directly replaced without changing the entire control board.

Q: Which ice makers is it compatible with?
A: Compatible with common flow-type commercial ice makers such as Naixue, Xuelu, Naikeweide, Xingji, Langtuo, Stute. Check dimensions: total height 19.2cm, diameter 5.6cm, mounting hole spacing 31mm.

Q: What causes reduced water output?
A: It is usually the impeller jammed by scale or debris. Remove the pump cover and clean the impeller and filter screen; if the motor won't turn and the housing gets hot, it is usually a burned coil and the whole pump needs replacement.

2W ice maker dedicated water pump dimension diagram

Pump nameplate: YSP2P-JDVF2 220V 0.12A 2400r/min

Close-up of pump outlet barb fitting

Close-up of pump bottom inlet filter screen

Detail of pump outlet barb fitting

Close-up of pump three-core power cable