High-Power 4000W SCR Voltage Regulator Board, Dimming Speed Temperature Control Module, AC220V AC Voltage Stepless Adjustment Controller, TRIAC + Aluminum Heatsink, BTA41
Brief Description
High-power 4000W SCR voltage regulator module, AC220V input, onboard BTA41 TRIAC and aluminum heatsink, stepless adjustment via potentiometer knob — dimming, speed control and temperature control all in one board. L-IN/L-OUT terminals with fuse holder, no need to distinguish live and neutral wires. Suitable for power regulation of electric heating tubes, motors, fans, incandescent lamps and other loads. This page includes specifications and wiring diagram.
Quantity
Product Overview
This module is a high-power SCR phase-control voltage regulator board with AC220V input. It uses an onboard potentiometer to achieve stepless adjustment of the output voltage, enabling dimming, speed control and temperature control of the load. The core component is a high-current TRIAC paired with an aluminum alloy heatsink, with a rated power of up to 4000W (proper heat dissipation required).

Technical Specifications
| Item | Specification |
|---|---|
| Operating Voltage | AC 220V 50/60Hz |
| Rated Power | ≤4000W (heat dissipation is essential for high-power loads) |
| Core Component | BTA series high-current TRIAC + aluminum heatsink |
| Adjustment Method | Stepless adjustment via onboard potentiometer knob |
| Terminals | L-IN power input / L-OUT to load, with fuse holder |
| Wiring Notes | No need to distinguish live and neutral wires |


Wiring Method
Connect the mains to the L-IN terminal, and connect the load in series to the L-OUT circuit. No need to distinguish live and neutral wires. Before powering on, please confirm that the fuse rating matches the load.

Applicable Loads and Precautions
- Applicable: temperature control of electric heating tubes/resistance wires, speed control of series-wound motors/fans, dimming and temperature control of incandescent lamps/electric blankets and other resistive and some inductive loads
- Not applicable: capacitive loads (energy-saving lamps, switching power supplies, etc.)
- For high-power long-term operation, heatsink and air cooling must be provided; it is recommended to leave a power margin for the load
- The onboard potentiometer is sealed with wax for shock resistance; please disconnect power before adjusting
FAQ
Q: What is the maximum power it can handle?
A: Rated up to 4000W. For high-power use, the heatsink must be well ventilated; it is recommended to leave a margin for the load.
Q: What loads can it control?
A: Suitable for temperature control, speed control and dimming of electric heating tubes, resistance wires, series-wound motors, fans, incandescent lamps and other resistive/some inductive loads.
Q: Does wiring require distinguishing live and neutral wires?
A: No need to distinguish live and neutral wires. Simply connect L-IN to the mains and L-OUT in series with the load. Just make sure the fuse is properly installed.
Q: Why can't it drive energy-saving lamps?
A: Energy-saving lamps and switching power supplies are capacitive loads, which are incompatible with the phase-control voltage regulation principle. Please do not use it for such loads.