Compatible with Xuelian (夏雪), Manitowoc, and Fushen Ice Machines — Bin Full Switch Probe, Ice Full Sensor Replacement Part, Snap-In Mounting, Dual Spring Terminals, Auto Shutoff When Bin Is Full
Brief Description
Bin full switch probe (ice full sensor) compatible with Xuelian (夏雪), Manitowoc, Fushen, and other ice machine brands. White bracket approx. 27×60mm, black two-core wire with dual spring terminals. Detects the bin-full signal to trigger shutdown. Direct drop-in replacement for the original position. This page includes dimensions and detailed real photos.
Quantity
Product Overview
This probe is a bin full switch (ice full sensor) for ice machines, compatible with Xuelian (夏雪), Manitowoc, and Fushen models. It is installed on the side wall of the ice chute inside the cabinet. When the bin is full, it sends a signal to the control board to trigger harvest/shutdown.

Dimensions & Connections
| Item | Specification |
|---|---|
| Type | Bin full detection switch probe |
| Bracket size | Approx. 27mm × 60mm |
| Lead wire | Black two-core wire (with orange/black split wires) |
| Terminals | Dual spring terminals |
| Compatible brands | Xuelian (夏雪) / Manitowoc / Fushen |

Detail Photos
The white engineering plastic bracket is one-piece molded, and the snap-in mounting position matches the original machine. The sensing element is sealed inside the bracket, and the lead wire is stress-reinforced to resist breakage.





Replacement Tips
- Disconnect power before replacement, then snap into the side wall of the ice chute in the original position
- Connect the dual spring terminals according to the original wire order, and push in firmly to prevent loosening
- After installation, test the machine to check whether the bin-full shutdown operates normally
FAQ
Q: Which brand models is it compatible with?
A: It is compatible with Xuelian (夏雪), Manitowoc, Fushen, and other brand ice machines for bin-full detection. Please compare with the appearance of the original part before ordering.
Q: What is the probe size?
A: The bracket is approx. 27×60mm with a snap-in mounting position, directly matching the original position.
Q: How do I wire it?
A: The black two-core wire ends in dual spring terminals. Simply plug them back into the corresponding terminals on the control board following the original wire order.
Q: What happens if the ice full sensor fails?
A: Typical symptoms include the machine not stopping when the bin is full, ice overflowing, or failure to harvest. Replacing this probe will restore normal operation.