Free shipping over $99 | Worldwide Delivery
Bitfala
Ice Maker Water Inlet Valve AC220V Solenoid Valve 3/8 Quick Connect 0.02-0.8MPa Commercial Ice Machine Water Inlet Controller Repair Part

Ice Maker Water Inlet Valve AC220V Solenoid Valve 3/8" Quick Connect 0.02-0.8MPa Hole Spacing 25×25mm Commercial Ice Machine Water Inlet Controller Repair Replacement Part

Unit price:
In Stock - 1000 Units

Brief Description

AC220V water inlet solenoid valve designed for ice makers, 3/8" quick connect fitting, operating water pressure 0.02-0.8MPa, normally closed — water shuts off when power is cut. High-stability coil resists high temperatures and burnout, tool-free quick install with plug-and-play convenience, universally compatible with most commercial ice maker brands. This page includes a specification table, installation dimensions and wiring instructions.

Quantity

Fast Shipping
Secure Payment
30 Days Return

Product Overview

This is an AC220V water inlet solenoid valve designed for ice makers, featuring a 3/8" quick connect fitting. It is a core wear-and-tear part for controlling automatic on/off water flow in commercial ice makers and small refrigeration equipment. Widely compatible with most mainstream ice maker models, making repair and replacement quick and easy.

Ice maker water inlet solenoid valve 3/8 quick connect AC220V

Key Specifications

ItemSpecification
Operating VoltageAC 220V 50Hz
Fitting Size3/8" quick connect
Fitting Inner DiameterApprox. 10mm
Operating Pressure0.02 – 0.8MPa
Applicable MediumClean water
Operating ModeNormally closed (water off when powered down)

Product Features

  • High-stability coil resists high temperatures and burnout, low operating noise
  • 3/8" quick connect for tool-free installation, plug and play, high repair efficiency
  • Premium sealing structure prevents leaks and drips, long service life
  • Universally compatible with most commercial ice maker brands
  • Compact size for flexible installation, fits most machine mounting positions

Side view of inlet valve Factory Direct

Installation Dimensions

The mounting hole spacing at the bottom of the valve body is approx. 25mm × 25mm. Install the inlet and outlet ports according to the IN (water in) / OUT (water out) markings printed on the valve body — never install in reverse.

Bottom dimensions 25mm and IN OUT water flow direction

3/8 inch quick connect 10mm diameter

Application Scenarios

Suitable for repair of all kinds of commercial ice makers, small cold drink equipment and ice-making equipment. A must-have replacement part for troubleshooting water circuit faults and routine maintenance.

Applied to commercial ice maker water inlet control

Replacement Tips

  • Always cut power and water before replacement
  • Insert the quick connect tube fully into place before turning on water to test for leaks
  • Push the wire terminals on firmly and make sure the water flow direction arrow on the valve body is not reversed

FAQ

Q: What size quick connect fitting is it?

A: 3/8" quick connect fitting, with an inner diameter of approx. 10mm. Simply push the matching size tubing straight in to lock it.

Q: What are the operating voltage and pressure range?

A: AC220V 50Hz power supply, operating water pressure 0.02-0.8MPa, covering the vast majority of water supply scenarios.

Q: What is the state after power is cut?

A: Normally closed design — water shuts off when power is cut and opens when powered, matching the water inlet control logic of ice makers.

Q: Will it fit my ice maker?

A: Universally compatible with most commercial ice maker brands. Before ordering, compare the appearance, fitting size and mounting hole spacing with your original valve.