Free shipping over $99 | Worldwide Delivery
Bitfala
MIC Condenser Microphone Amplifier Module High-Sensitivity Pickup Low-Noise Voice Amplifier Board DC5-12V

MIC Condenser Microphone Amplifier Module, High-Sensitivity Pickup Preamplifier Board, Low-Noise Voice Acquisition, DC5-12V, 13×22mm, MCU Sound Control DIY Electronic Module

Unit price:
In Stock - 1000 Units

Brief Description

MIC condenser microphone amplifier module with high-sensitivity pickup, low-noise voice amplification, DC5-12V wide voltage supply, onboard MIC IN and OUT terminals, and a compact 13×22mm size. Ideal for home appliance voice control retrofits, sound-activated device development, intercom recording, and DIY electronics projects. This page covers module specifications, wiring methods, and application scenarios.

Quantity

Fast Shipping
Secure Payment
30 Days Return

Product Overview

This module is a MIC condenser microphone preamplifier board with a built-in low-noise amplifier circuit. It connects directly to an electret microphone and amplifies weak voice signals into audio output that can be recognized by a microcontroller or power amplifier. It supports DC5-12V wide voltage input, and the compact board measures only 13×22mm with mounting holes at all four corners for easy embedding into various devices.

Front view of the MIC microphone amplifier module

Interfaces and Wiring

The board has clear silkscreen labels: MIC IN connects to an electret microphone (mind the polarity), OUT outputs the amplified audio signal, and power is supplied via DC 5-12V. Wiring is simple and no external components are required for operation.

Module interface labels OUT PUT and DC5-12V

Technical Specifications

ItemSpecification
Supply VoltageDC 5-12V (board silkscreen shows 5-9V; 5-9V recommended for safer operation)
Amplifier DeviceLow-noise amplifier circuit (SOT-23 package)
InputMIC IN (electret condenser microphone)
OutputOUT audio signal output
Board DimensionsApprox. 13mm × 22mm
Hole Spacing2.54mm
Mounting HolesFour corner mounting holes

Module dimensions 13mm×22mm, hole spacing 2.54mm

Application Scenarios (AI Upgrade Ready)

  • Home Appliance Voice Control Upgrades: Voice control retrofits for ice makers, water dispensers, water purifiers, rice cookers, and electric kettles; pair with ESP32/STM32 control boards to capture user voice signals and connect to Doubao AI for voice command control; can also serve as the audio acquisition unit for voice fault announcement modules
  • Sound-Activated / Sensor Device Development: Core pickup component for sound-activated switches, sound-activated lights, and sound-activated relay modules; preamplifier unit for sound detection and environmental noise monitoring devices
  • Surveillance / Intercom / Recording Systems: Pickup amplifier module for small surveillance cameras and intercom doorbells; preamplifier board for recording devices and small microphone arrays
  • Teaching / DIY Electronics Projects: General-purpose module for introductory speech recognition projects and audio amplification experiments; basic audio acquisition unit for smart home DIY and maker projects

Component details on the back of the module

Handheld photo showing the compact size

FAQ

Q: What microphone does the module use?

A: Connect an electret condenser microphone directly to the MIC IN terminal. Mind the polarity — connect the microphone's positive lead to +.

Q: What is the supply voltage?

A: It supports DC5-12V wide voltage input. The board silkscreen is marked 5-9V DC; using it within 5-9V is recommended for safer operation.

Q: Can the output connect directly to a power amplifier or microcontroller?

A: The OUT output is an amplified audio signal that can be fed into a power amplifier preamp stage or a microcontroller ADC/speech recognition module for sampling.

Q: Can it be used for home appliance voice control retrofits?

A: Yes. A common approach is to pair it with an ESP32/STM32 or similar main controller to capture voice signals and connect to a voice AI platform for command control.