Free shipping over $99 | Worldwide Delivery
Bitfala
Compatible with Manitowoc QD0132AC QD0212AC ice machine computer control board circuit board

Manitowoc Ice Machine Control Board Computer Board Mainboard Compatible with QM45 QD0132AC QD0212AC QD0272AC No Rewiring Required Direct Replacement Repair Circuit Board

Unit price:
In Stock - 1000 Units

Brief Description

Compatible with Manitowoc ice machine control board (computer board), fits QM45 / QD0132AC / QD0212AC / QD0272AC and other models. Repair-specific replacement board with connectors identical to the original — no rewiring needed, plug and use directly. This page includes compatible models, onboard connector descriptions, and replacement precautions.

Quantity

Fast Shipping
Secure Payment
30 Days Return

Product Overview

This board is a repair replacement for the Manitowoc commercial ice machine control board. It features an onboard power transformer, three relays, and control circuitry for ice machine operation control. No rewiring required — direct replacement of the original board. Ideal for control board fault repair on QM45 and other models.

Manitowoc ice machine control board full view

Compatible Models

Compatible Models
QM45
QD0132AC
QD0212AC
QD0272AC

Before ordering, please compare the original board's appearance, silkscreen version, and connector positions to confirm a match.

Features

  • Onboard 3 high-power relays for controlling compressor, water pump, and other loads
  • Built-in power transformer for voltage step-down, onboard voltage regulation and filter circuits
  • Onboard yellow/red LED indicators for easy status monitoring
  • PROBE connector for temperature/level sensors
  • Connectors identical to the original board — Plug & Play

Control board angled view

Close-up of relay and transformer area

Onboard Connectors

ConnectorDescription
P16-pin connector (load/signal output)
P24-pin connector
PROBE2P probe terminal (sensor input)

Close-up of PROBE connector

Close-up of P1 6-pin connector

Craftsmanship Details

The mainboard uses double-sided fiberglass board with full solder joints; the chip area has a neat layout with clear traces, and the back is coated with solder mask for moisture and oxidation protection.

Close-up of main control chip area

Control board back traces

Replacement Precautions

  • Always disconnect power before replacement
  • Plug P1, P2, and probe connectors into their original positions, paying attention to orientation
  • After replacement, power on first and observe indicator status before testing
  • If the fault persists, check sensors and loads — do not repeatedly power cycle

FAQ

Q: Which models is this control board compatible with?

A: It is compatible with Manitowoc QM45, QD0132AC, QD0212AC, QD0272AC and other models. Please verify the original board's appearance and connectors before ordering.

Q: Does replacement require rewiring?

A: No. The connectors are identical to the original board — no rewiring needed, just replace and use directly.

Q: What should I pay attention to when replacing the control board?

A: Disconnect power first, plug P1, P2, and the probe connector into their original positions, then power on and observe the indicators before testing.

Q: Are there indicator lights on the board?

A: Yes, there are onboard yellow and red LED indicators for checking power supply and operating status.