Ice Maker Float Water Level Switch, Two-Wire Liquid Level Sensor, Water Tank Float Probe, 10mm Mounting Thread, 40mm Rod Length, Water Shortage Protection, Automatic Refill, Universal Ice Maker Accessory
Brief Description
Ice maker water tank float level switch, two-wire output, float closes on downward travel, universal water level sensing probe. Compatible with nugget ice makers and other commercial ice maker water tank level control and water shortage protection, wholesale supported. This page covers float switch specifications, dimensions, wiring method and FAQs.
Quantity
Product Overview
This is a float-type liquid level switch used for water level sensing and water shortage protection in ice maker water tanks. Two-wire output, non-polarized. The float moves up and down with the water level to actuate the internal switch: the switch closes when the float travels down and opens when it travels up. Paired with a control board, it enables automatic refilling and water shortage shutdown.

Technical Specifications
| Item | Specification |
|---|---|
| Type | Float-type water level switch (reed switch type) |
| Output | Two-wire, non-polarized |
| Actuation logic | Float down = closed / float up = open |
| Float diameter | Approx. 25mm |
| Float height | Approx. 25mm |
| Mounting thread | Approx. 10mm |
| Rod length | Approx. 40mm |
| Lead wire | Black two-core wire + 2P terminal |

Working Principle
A magnetic ring is embedded in the float. Water level changes move the float along the rod, and the reed switch inside the rod closes or opens under the magnetic field, sending a switch signal to the control board. Float down = closed (low water level signal), up = open.

Installation Dimensions
Mounting thread approx. 10mm, rod length approx. 40mm. Insert through the mounting hole on top of the water tank and secure with the nut and sealing ring, with the float hanging down into the water.

Installation Photos and Precautions
Installed on top of the ice maker water tank with the float hanging naturally into the water. Precautions:
- The sealing ring must be pressed tight to prevent leaks
- No obstacles may block the float's travel range
- The two wires are non-polarized; simply connect in series to the control circuit
- Clean scale regularly to prevent the float from sticking

FAQs
Q: What is the actuation logic of the float water level switch?
A: The switch closes when the float travels down (low water level signal) and opens when it travels up, working with the control board for automatic refilling and water shortage protection.
Q: How do I connect the two wires? Do I need to match polarity?
A: The two-wire output is non-polarized; connect it in series to the control circuit, no polarity distinction needed.
Q: How do I install it?
A: Insert it through the tank mounting hole, secure with the nut and sealing ring, and let the float hang into the water. Make sure there are no obstacles within the float's travel range.
Q: Which machines is it suitable for? Do you support wholesale?
A: It fits water level control in nugget ice makers and other common commercial ice maker water tanks, with universal dimensions. Wholesale is supported; contact customer service for bulk orders.