FS100P Serial-to-Ethernet Module TTL to RJ45 Bidirectional Transparent Transmission DTU Serial Server Supports MQTT/HTTP Alibaba Cloud OneNET Auto Reconnect Industrial Networking
Brief Description
FS100P Serial-to-Ethernet Module, TTL to RJ45 transparent bidirectional transmission, supports TCP/UDP Client/Server, MQTT, HTTP transparent transmission, native access to Alibaba Cloud and OneNET IoT platforms; 2 independent channels, supports heartbeat/registration packet/KeepAlive link maintenance, automatic reconnection on disconnection, self-handling of exceptions, parameters saved on power loss; supports 3.3V/5V power supply, static IP/DHCP, domain name connection and FOTA remote upgrade, zero-code rapid deployment, widely used in industrial control, smart grid, security systems, financial equipment, new energy and other IoT scenarios.
Quantity
Product Overview
FS100P is a highly integrated serial-to-Ethernet transparent transmission module (TTL to RJ45). It comes with built-in DTU firmware from the factory. With simple configuration, it enables bidirectional data transparent transmission between serial ports and networks, supporting Client/Server, MQTT, HTTP and other working modes, with zero-code development and rapid deployment.

Hardware Features
- Highly integrated design, plug-and-play, industrial-grade design;
- Supports 3.3V or 5V power supply, 3.3V TTL serial level;
- Built-in MAC address, no additional application required;
- Network information supports static configuration and DHCP automatic acquisition.

Product Features
- Zero-code development, rapid deployment: Comes with built-in DTU firmware from the factory. With simple configuration, it enables data transparent transmission from serial port to network, shortening development cycles;
- Multiple configuration methods: Supports four configuration methods: host computer software, Web page, Socket remote, and serial AT commands, allowing flexible configuration as needed;
- Flexible network configuration: Network information such as IP address supports static configuration and DHCP configuration.

Working Modes
- TCP/UDP Client: Actively initiates connection requests to TCP/UDP servers and establishes connections. After successful connection, the serial device and server perform bidirectional transparent transmission, and immediately initiates reconnection after disconnection;
- TCP/UDP Server: Provides 2 Client connections, actively monitors the set server port, and waits for terminal device connections;
- MQTT Transparent Mode: Supports MQTT protocol, supports multi-topic subscription and publishing;
- HTTP Transparent Mode: Serial data is submitted to a specified server via HTTP (GET/POST). URL, Header and other parameters can be configured;
- Alibaba Cloud Mode: Native access to Alibaba Cloud platform, supports one-machine-one-secret, one-line-one-secret, and auto-registration types;
- OneNET Mode: Native access to OneNET platform, supports active registration and user registration types.

Self-Handling of Exceptions
FS100P can operate autonomously, automatically handling network exceptions such as false connections, IP conflicts, sudden network interruptions, and abnormal link disconnections, reducing development difficulty, saving MCU resources, and improving system operating efficiency.

Parameters Saved on Power Loss
FS100P parameters are not lost when power is off, no secondary configuration is needed. Configure once and it will automatically connect to the network, greatly improving communication efficiency and end-user experience.

Link Maintenance
Supports heartbeat packets, registration packets, KeepAlive and other link maintenance mechanisms, making connections more stable and usage more reassuring.

Supports 2 Independent Channels
FS100P can establish two channel connections simultaneously (e.g., SOCKET1, SOCKET2). Each channel works independently without interference, supports channel data distribution, and can connect to different servers such as TCP, MQTT, etc.

Supports Domain Name Connection
Supports direct domain name input for connection, effectively solving dynamic IP server issues.

FOTA Self-Upgrade
FS100P firmware can be upgraded remotely. Via AT+FOTA commands, it supports both default server path upgrade and custom remote upgrade server path upgrade.

MCU Firmware Remote Upgrade
Supports remote upgrade of user MCU firmware via HTTP and FTP, facilitating later product maintenance and iteration.

Pin Description
| Item | Parameter |
|---|---|
| 5V | 5V Power Input Positive |
| 3V3 | 3.3V Power Input Positive |
| GND | Power Input Negative |
| RST | Reset Pin, pull low for over 200ms for hardware reset |
| TXD | Main Serial Transmit Pin |
| RXD | Main Serial Receive Pin |
| REF | Factory Reset Pin, pull low for over 3 seconds to restore factory settings |

Application Areas
Widely used in industrial control, artificial intelligence, smart grid, security systems, financial equipment, new energy and other fields.

FAQ
Q: What working modes does FS100P support?
A: TCP/UDP Client, TCP/UDP Server, MQTT transparent transmission, HTTP transparent transmission, and native access modes for Alibaba Cloud and OneNET IoT platforms.
Q: What are the power supply voltage and serial level?
A: Supports 3.3V or 5V power supply, serial port is 3.3V TTL level.
Q: Will the configuration be lost after power off?
A: No, parameters are saved on power loss. Configure only once and it will automatically connect to the network.
Q: How to restore factory settings?
A: Pull the REF pin low for over 3 seconds to restore factory settings; pull the RST pin low for over 200ms for hardware reset.
Q: Can it connect to two servers simultaneously?
A: Yes, FS100P supports two channels (SOCKET1/SOCKET2) connected simultaneously. Each channel works independently without interference, and supports channel data distribution.
Q: How to upgrade the firmware?
A: Supports AT+FOTA remote upgrade of module firmware (default server or custom server path), and supports HTTP and FTP remote upgrade of user MCU firmware.